This metal can sealing machine is an automatic metal can sealing machine with 8 sealing rollers. It can be used for 5-layer roll seal or 7-layer roll seal. It is designed for connecting can body resistance welding, taper expansion, flanging, expansion ribs and other automatic lines. This part consists of two metal can sealing machine, a turning machine and a conveyor frame. It can be used for sealing tinplate packaging cans in various can factories. Such as: packaging cans for various food, cooking oil, paint, motor oil, etc. This machine is mainly suitable for the sealing of 16L-20L convenient barrels and closed barrels (a small amount of adjustment can be made according to user needs). Users can also purchase any part of them according to their own needs.
The equipment has stable performance, simple structure and operation. The operation of the whole machine is controlled by PLC with low noise. long lasting. The tank holding mold is driven by a servo motor and a ball screw, with high positioning accuracy. The sealing quality is reliable and it is the ideal equipment for the can making factory.

The can body comes out of the resistance welding machine and is sent forward by the conveyor belt. First, expand the taper, then flanging (wind mouth), expand the tendons. The conveyor belt then sends the can body to the first metal can sealing machinefor sealing. If it is used to produce closed barrels, the can body must go through a U-turn machine and then enter the second metal can sealing machine for sealing. On the left side of the machine head, there is an automatic lid separating device. The operator only needs to put the rounded can lids into the hopper one by one. When working, the cover is driven by the cylinder to separate the cover one by one. A tank body positioning cylinder is installed on the conveying rack under the sub-lid seat to block the tank body. Position the can body directly under the lid and wait for the lid to fall. At this time, the holding mold comes over to hold the can body and the lid together, and then position the cylinder to release one by one. Hold the can body and lid to another station. The other holding tank mold is sent to the bottom of the first host for sealing. The position of the positioning cylinder can be adjusted in a small amount according to the size of the tank. The tank holding mold and the tank pushing mold are both mounted on two symmetrical long sliding plates. The long sliding plate is connected with the ball screw, and the ball screw connected with the servo motor moves the tank holding mold back and forth. When working, the tank holding mold will hold the tank body and lid at the same time, and then send them to the bottom of the host for sealing. At the same time, the pushing block installed on the same slide plate as the holding mold pushes the last sealed can body onto the conveyor belt of the middle conveyor frame. After the can body has run for a certain distance, the turning machine will turn the can body. When the can body runs to the second host, repeat the previous action, the holding mold will hold the can body and the lid at the same time, and send it to the second host for sealing.

If you want to know the detailed production process of the can seamer, please click the following link: https://youtu.be/zIwQ2f7p0gg